The Roku remote is a device that lets users control their TV and other media devices. It uses infrared signals to communicate with the television, which makes it difficult for people who have low vision or are blind to use.
The roku remote pairing light not flashing is a problem that many users have encountered. Luckily, there are fixes for the issue.
You may have been out working for a long time, and when you get home and turn on the TV, you discover that your Roku remote isn’t functioning? Isn’t it true that the majority of us will be frustrated?
Roku, while being a fantastic gadget to use, may be troublesome from time to time. You do not need to be concerned if your Roku device has suddenly ceased functioning. You are not the only one who is dealing with this situation.
Although you can operate it from your smartphone, this is not a practical solution. The Roku control isn’t functioning, and there may be a variety of causes for this. If that remote isn’t viewed correctly, it may be a big pain.
As a result, in this post, you will learn how to approach and resolve the issue of your troublesome report. To get your remote to function correctly, follow these troubleshooting instructions.
First, let’s look at what’s causing the Roku control to stop functioning.
What causes the Roku remote to become unresponsive?
We looked into the problem by looking at different user complaints and the solutions they came up with. We’ve found out a few things that may be causing your Roku control to stop functioning.
Batteries that have died:
One of the most frequent reasons for the remote not working is that the batteries are dead, and you may encounter this problem.
The remote’s pairing is as follows:
If you have just purchased a new gadget and are attempting to connect the remote, there may be a problem that you are unable to address.
Not being aware of:
Even if the remote and the device are already connected, there are occasions when they will cease recognizing each other for different reasons. The communication between them will be cut off as a result of this.
Problems with Wi-Fi:
The gadget and the remote will not function if there is no Wi-Fi connection available. Also, if a router’s channel is set incorrectly, it may create problems.
Before you attempt the techniques, check sure your remote is compatible with your device. Now that you have a fundamental grasp of the problem, you may go on to the next step.
Here’s how to repair your Roku remote if it’s not working.
1. Make sure the remote’s battery is charged.
Are you sure you checked the battery on your remote before doing anything? Are they effective? The issue with a Roku remote that isn’t functioning or is operating slowly may be due to depleted batteries.
There are Roku remotes that need two AA batteries and others that require AAA batteries. This information may be found in the handbook or on the Remote’s label. The batteries are inserted into the remote’s bottom rear.
By sliding the rear cover open, the batteries are readily accessed.
2. Restart your Roku device and remote.
Once you’ve restarted your Roku device as well as the Roku remote control. To accomplish the same, follow the instructions below.
To restart your Roku device, follow these steps:
- Turn off your Roku box.
- Remove the plug from the power outlet.
- Wait at least 5 seconds.
- Plug the power cable into the outlet.
- Turn on your Roku box.
To restart the Roku remote, follow these steps:
In the meanwhile, while the Roku device is loading and a loading screen displays on your television, you should perform the following:
- Remove the battery from the container.
- Remove the batteries from the remote control.
- Replace the batteries (or replace them if they’re dead).
- Make sure the batteries are properly placed.
- The next step is to connect your Roku remote with your Roku device ( see the previous point to do this).
3. Connecting the Roku Remote to the TV
Another frequent issue with Roku remotes is that they may not function because the pairing is incorrect rather than the remote itself. It may be disconnected from the device with which it was designed to work.
It may be caused by a number of things, including switching WiFi networks, installing system updates, using the remote with another Roku Box, or any other problem.
In this case, you’ll need to pair your Roku remote with your device once again. Make sure there is no blockage between the remote and the device before doing so.
Make sure your remote is properly linked with your Roku device.
To re-pair the Roku Remote, follow these steps:
- Press and hold the black pairing button in the battery compartment for a long time.
- Observe the LED light in front of the remote until it flashes.
- When the remote pairing dialog opens, follow the on-screen directions.
4. Reset the Roku remote control
If none of the previous suggestions have worked, you may try resetting your Roku control to resolve the problem.
When you need to reset a remote, there are a few procedures you need to do. The first thing you should do is unplug your batteries.
Also, disconnect the whole device from the power source and reattach Roku to the power outlet after waiting at least 10 seconds. It will take some time for the home screen to load. Replace the batteries to check whether the problem has been resolved.
If the Roku Remote still does not function, go to the next step.
5. Wireless Internet Access
If you’ve tested everything and still can’t get your Roku Remote to function, there may be an issue with your WiFi network. Although the Roku remote does not need a WiFi connection to operate, it does require a functioning network in order to complete the job and connect to the box.
If the connection is down or lost, the remote will not function. As a result, check sure the connection is up and running before moving on to another option.
If you consider yourself tech-savvy, go into the network settings to see what may be causing the Roku control to stop working.
6. Remove the remote control.
Roku remotes sometimes need to be cleaned and fixed. Perform the following actions:
- It is necessary to clear the remote.
- Remove the remote’s batteries.
- Remove the Roku device from the wall.
- Long press the A, B, and black pairing buttons all at the same time.
- To ensure that your remote has been cleared, wait until the LED light flashes three times.
- Connect the Roku device to the TV and turn it on.
- To re-pair the remote with your device, hit the pairing button one again.
7. Double-check your HDMI connection.
The TV will be connected to the Roku streaming stick through the HDMI connector. You may experience interference if your device is connected into the HDMI port. You’ll need an HDMI extension to fix this problem, which you can get for free from Roku.
Check to see whether you have the Roku serial number. It’s written on the device’s sticker.
8. Look for an IR (infrared) signal that has been obstructed.
The IR remote will need a clear and uninterrupted connection. If there are any walls, objects, or other obstacles in the way of the Roku remote’s direct line of sight, the remote will not function.
If you are unable to remove the obstruction, raise the remote higher to get a clear signal and aim the remote toward the player’s front.
9. Make use of the Roku Remote App.
If the remote isn’t working, download the Roku remote app from the Apple or Google Play stores. The app includes all of the Roku remote’s capabilities and will make it simple to use the text search.
It is available for download from the Google Play Store for Android users and the App Store for iPhone users.
10. It’s Time to Get a New Remote Control
If none of the above methods resolve your Roku remote not functioning issue, it’s time to get a new one. Before making a purchase, be sure to check the list of compatible items for your Roku device.
Conclusion
The following suggestions will assist you in resolving the Roku remote issue. If none of these suggestions are effective, you may need to replace the remote or seek advice from specialists.
The roku remote app not working is a problem that has been present for a while. Roku has released some fixes to fix the issue.
Frequently Asked Questions
Why did my Roku remote stop working?
The remote may have been damaged or lost. You can buy a new one here
How do I reset my Roku remote?
To reset your Roku remote, you will need to press the home button on the remote.
How do I get my Roku remote to work?
The Roku remote can be used to control the Beat Saber experience. To do this, you will need to pair your remote with your PC or Mac using a USB cable.
Related Tags
- roku remote not working no pairing button
- roku remote reset button
- roku remote not working with new batteries
- roku remote not working volume
- roku remote not pairing
